home *** CD-ROM | disk | FTP | other *** search
/ Software Vault: The Gold Collection / Software Vault - The Gold Collection (American Databankers) (1993).ISO / cdr25 / mr2_151.zip / MR2.HLP < prev    next >
INI File  |  1993-05-09  |  12KB  |  352 lines

  1. [MainMenu]
  2.             MAIN MENU HELP
  3.  
  4. Select the desired option using the
  5. cursor keys and press ENTER.  Optionally,
  6. you may "click" the left mouse button on
  7. the desired option.
  8.  
  9. The first letter of each option works as
  10. a "hot-key".  You may also invoke an
  11. option simple by pressing its correspond-
  12. ing hotkey.
  13. [PackSel]
  14.                      PACKET SELECTION HELP
  15.  
  16. To select a packet to open for reading, simply use the cursor keys
  17. to highlight the desired packet and then press ENTER.  Optionally,
  18. you may "click" on the desired packet with the left mouse button.
  19.  
  20. Paging through a large file list is possible by pressing PAGE UP and
  21. PAGE DOWN.  Also, the arrow keys will cause the display to scroll
  22. up/down as necessary.
  23.  
  24. Pressing ESCAPE will exit MR/2 and return you to the OS/2 command
  25. line.  Use ALT-E to enter message w/o an existing packet.
  26.  
  27. Also, ALT-C will take you into your editor for modifications of the
  28. MR2.INI file.  ALT-P edits the Packet Path.  Alt-N relists packets.
  29.  
  30. While any packet is highlighted, you may use ALT-D to delete the
  31. marked packet (after confirmation) or ALT-R to rename it.
  32.  
  33. ALT-V will toggle through the available video display sizes.
  34. [READFILE]
  35.                 FILE DISPLAY HELP
  36.  
  37. To move about the file currently displayed, use any of
  38. the following keys:
  39.  
  40.     PAGE DOWN       To move forward one screen.
  41.     PAGE UP         To move backward one screen.
  42.     DOWN ARROW      To scroll down one line.
  43.     UP ARROW        To scroll up one line.
  44.     RIGHT ARROW     To scroll the view right.
  45.     LEFT ARROW      To scroll the view left.
  46.     HOME            To jump to the beginning.
  47.     END             To display the end.
  48.     spacebar        Page forward - exit if at end.
  49.     ESCAPE          Exit the current display.
  50.     E               To view the file w/your editor*
  51. [REPLYHDR]
  52.                    EDIT MESSAGE HEADER HELP
  53.  
  54. Edit the message header so that the To, Subject, Conference, Privacy
  55. and tagline are as you desire.  When all data is correct, press F10
  56. to "accept" or "save" the information, press ESCAPE to cancel the
  57. message.
  58.  
  59. For replies, the F2 key can be used to toggle the TO file between
  60. the original message's sender and receiver.  The default is to
  61. address the message to the original sender.  You can see the message
  62. header you are replying to at the top of the screen (if you are
  63. replying).
  64. [READ]
  65.                       MESSAGE READING HELP
  66.  
  67.  The following keys are available while reading messages:
  68.  
  69.  ENTER/+ Move forward one message          P - Print to "prn" device
  70.    G/-   Move backward one message         O - Shell a command line
  71.    S     Print the message to a file       Z - Skip to next "unread"
  72.    F     Find text within the conference   Q - Thread Selection menu
  73.    T     Steal the message's tagline       D - Defer to INBASKET
  74.    I     Select individual messages by header information
  75.    K     Kill the current reply (reply conference ONLY)
  76.    R     Reply to the current message/modify a reply
  77.    N/L   Find NEXT/PREVIOUS match for current text search
  78.    X     Exit MR/2 fast - without cleanup, on confirmation
  79.    H/B   Move forward/backward inside thread
  80.  
  81.    TAB/BACKSPACE      Jump to NEXT/PREVIOUS thread
  82.    PAGE UP/DOWN       To move forward/backward one screen
  83.    UP/DOWN ARROW      To scroll up/down one line
  84.    RIGHT/LEFT ARROW   To scroll the view right/left
  85.    HOME/END           To jump to the beginning/end of the message
  86.    spacebar           Page forward - next message if at end
  87.    ESCAPE             Exit the current display
  88. [CONFSEL]
  89.             CONFERENCE SELECTION HELP
  90.  
  91. To select a conference for reading, simply use the
  92. cursor keys to highlight the desired conference and
  93. then press ENTER.  Optionally, you may "click" on
  94. the desired conference with the left mouse button.
  95.  
  96. Paging through a large conference list is possible
  97. by pressing PAGE UP and PAGE DOWN.  Also, the arrow
  98. keys will cause the display to scroll up/down as
  99. necessary.
  100.  
  101. You may search for text in ALL conferences from
  102. here.  Press ALT-F for the search form.
  103.  
  104. ALT-A and ALT-D may be used to ADD/DROP any
  105. displayed conference.
  106.  
  107. Pressing ESCAPE will exit conference selection and
  108. return you to the Packet's main menu.
  109.  
  110. The number of messages in each conference is
  111. displayed next to the conference name.
  112. [FILLSRCH]
  113.              SEARCH CRITERIA ENTRY
  114.  
  115. To search for a text string, simply enter the text
  116. to match and press ENTER.
  117.  
  118. The search is case insensitive; it will find the
  119. specified text ignoring any any differences in the
  120. case of individual characters.
  121.  
  122. When a message is found that contains the specified
  123. text, it will be displayed with the first matching
  124. line displayed on the second line of the display.
  125. [INDSEL]
  126.           MESSAGE SELECTION HELP
  127.  
  128. To select a message for reading, simply use
  129. the cursor keys to highlight the desired
  130. message and then press ENTER.  Optionally,
  131. you may "click" on the desired message with
  132. the left mouse button.
  133.  
  134. Paging through a large message list is
  135. possible by pressing PAGE UP and PAGE DOWN.
  136. Also, the arrow keys will cause the display to
  137. scroll up/down as necessary.
  138.  
  139. Pressing ESCAPE will exit message selection
  140. and return you to the previously displayed
  141. message.
  142. [FASTEXIT]
  143.            FAST EXIT HELP
  144.  
  145. If you wish to exit MR/2 at this time.
  146. press ENTER.  This will bypass all
  147. MR/2's cleanup functions and return to
  148. the current packet at a later time.
  149.  
  150. If you do not wish to exit at this
  151. time, press ESCAPE.  You will be
  152. returned to view the more messages.
  153.  
  154. If you exit now, next time you invoke
  155. MR/2, you will be informed of the
  156. existence of a "previous" package and
  157. asked if you would like to continue
  158. here.  Answer YES (use the ENTER key)
  159. to read the packet, NO (use ESCAPE) to
  160. exit.
  161. [PREVREP]
  162.        PREVIOUS REPLIES EXIST HELP
  163.  
  164. MR/2 has found that the packet directory
  165. contains replies from a previously session.
  166. These could be legitimate replies from an
  167. unfinished packet, or they may have already
  168. been uploaded.
  169.  
  170. If you would like to keep the existing
  171. replies - simply press ENTER.
  172.  
  173. If you would like to remove all previous
  174. replies  -  press ESCAPE and MR/2 will
  175. proceed with a fresh, empty reply file.
  176. [PREVPACK]
  177.       PREVIOUS PACKET EXISTS HELP
  178.  
  179. MR/2 has found that the work directory
  180. contains remnants of a previously opened
  181. packet.  This could have resulted from
  182. a previous "Fast Exit", or even a system
  183. error.
  184.  
  185. If you would like to investigate the
  186. existing packet files - simply press
  187. ENTER.
  188.  
  189. If you would like to remove the previous
  190. packet's messages  -  press ESCAPE and
  191. MR/2  will allow you to select a new
  192. packet for reading.
  193. [BULSEL]
  194.            BULLETIN SELECTION HELP
  195.  
  196. To select a bulletin for reading, simply use
  197. the cursor keys to highlight the desired
  198. bulletin and then press ENTER.  Optionally,
  199. you may "click" on the desired bulletin with
  200. the left mouse button.
  201.  
  202. Paging through a large bulletin list is
  203. possible by pressing PAGE UP and PAGE DOWN.
  204. Also, the arrow keys will cause the display to
  205. scroll up/down as necessary.
  206.  
  207. Pressing ESCAPE will exit bulletin selection
  208. and return you to the packet's main menu.
  209. [KILLREP]
  210.           KILL REPLY
  211.  
  212. Press ENTER to mark this reply
  213. as KILLED.  This will prevent
  214. it from being sent to the
  215. target mail door.
  216.  
  217. Press ESCAPE if you wish to
  218. KEEP this reply active.
  219. [ABORTREP]
  220.         ABORT MESSAGE
  221.  
  222. Press ENTER to cancel the entry
  223. of this message.  Your message
  224. information will be lost.
  225.  
  226. Press ESCAPE to continue with
  227. the processing of the message.
  228. [RENPACK]
  229.         RENAME PACKET
  230.  
  231. Enter a new name for the chosen
  232. packet and press ENTER.
  233.  
  234. Press ESCAPE if you really don't
  235. wish to rename this packet.
  236. [DELPACK]
  237.            DELETE PACKET
  238.  
  239. Press ENTER to delete the selected
  240. packet.  To cancel the delete request,
  241. simply press ESCAPE.
  242. [PATHEDIT]
  243.               PACKET PATH EDIT
  244.  
  245. Modify the packet path as desired and press
  246. ENTER to list the packets found in the new path.
  247.  
  248. Press CANCEL to leave the packet path unchanged
  249. [TAGEDIT]
  250.               TAG STEALING AND EDITING
  251.  
  252. MR/2 has selected a line from the current message as the
  253. most likely "tagline".  This line is displayed for your
  254. editing before being appended to the tagline file.  Make
  255. any necessary or desired changes and press ENTER to save
  256. the new tag.  Press CANCEL to abort the stealing process.
  257.  
  258. If the tagline MR/2 has chosen is not the line desired,
  259. you may use the UP/DOWN arrow keys to scroll through
  260. the lines of the message.  Once the desired line is
  261. displayed, make any desired changes and press ENTER to
  262. save it.
  263. [JUMPLAST]
  264.             JUMPING TO YOUR LAST READ MESSAGE
  265.  
  266. This option takes advantage of the "bookmark" feature of
  267. MR/2.  Your last position in the packet is remembered and
  268. saved as extended attributes when you exit.  You now have
  269. the option of jumping directly to this position.
  270.  
  271. If you wish not to be "jumped" to this message, press
  272. ESCAPE and the normal main menu will be displayed.
  273.  
  274. If you do wish for MR/2 to place you at your last known
  275. position, press ENTER.
  276. [ADD]
  277.  
  278.            Not yet implemented
  279.  
  280. [DELETE]
  281.  
  282.            Not yet implemented
  283.  
  284. [FILLSRCH]
  285.                   SEARCH CRITERIA ENTRY
  286.  
  287. Fill in a text string to use in the search.  This string may
  288. contain spaces and the search is case-insensitive (e.g., "CAT"
  289. find "cat").
  290.  
  291. To search for more than one string at a time, separate the
  292. search strings with a backslash "\".
  293.  
  294. Soundex searching is requested by proceeding a search string
  295. with an apersand "&".  The soundexing algorithm is very "loose",
  296. so soundexing should be used only on longer words (not OS/2, but
  297. Windows will work nicely).
  298.  
  299. Example:   CTOS\&windows\OS/2
  300.  
  301. will find all messages containing either the text "CTOS", "OS/2"
  302. or anything that "sounds like" windows (i.e., windoze will match).
  303. [BBSSEL]
  304.           NO PACKET - BBS NAME SELECTION
  305.  
  306. Select from the displayed BBS names to enter a message
  307. when no packet currently exists.  The BBS's listed are
  308. all those from which MR/2 has been used to read QWK
  309. packets.  When a packet is opened, MR/2 copies the
  310. control data for the source BBS to a BBS.cfg file in
  311. the MR/2 home directory.
  312. [PICKTAG]
  313.                   TAG LINE SELECTION
  314.  
  315. All currently available taglines are displayed for your
  316. selection.  Use the "page" keys to move through the
  317. file a screen at a time, or the arrow keys to scroll.
  318.  
  319. Highlight the desired tagline and press ENTER to select
  320. it.  To cancel the tagline selection, simply press ESCAPE.
  321. [FILLSAVE]
  322.                    SAVE FILE NAME
  323.  
  324. Enter the name of the file to append the currently
  325. displayed message to.  For a list of existing save files,
  326. press F2.
  327. [SAVESEL]
  328. Select the name of the file to append the current message
  329. to.  You may used the "page" keys to page through this list,
  330. or the cursor keys to scroll through it.  Press ENTER to
  331. select any name.
  332.  
  333. Press CANCEL to exit this screen without selecting a name.
  334. [Editor]
  335.                        Internal Editor Help
  336.  
  337.  F1 - Help                          HOME/END
  338.  F2 - Search (^S)                   PAGE UP/DOWN
  339.  F3 - Search and Replace            CTRL END (^Z) - erase to end of line
  340.  F4 - Search again (^F)             CTRL RIGHT/LEFT - move by word
  341.  F5 - Mark/Bound block (^B/^K)      ALT-A - Drop Anchor (mark)
  342.  F6 - Move block (^R @M)            ALT-U - Unmark (mark off)
  343.  F7 - Copy block (^Y @C)            CTL-X - Delete current line
  344.  F8 - Delete block (^U @D)
  345.  F9 - Center line                   CTL-F9 - Reformat paragraph
  346. F10 - Save and Exit                 CTL-B  - Start of file
  347.                                     CTL-E  - End of file
  348.  F11 - Mark begin                   ALT-V  - Toggle  display
  349.  F12 - Mark end                     ALT-R/W - Read from/Write to file.
  350.                                     ESCAPE - exit w/o saving (confirmed)
  351. [END]
  352.